1.Technical parameters and dimensions:
|
Item |
Units |
Technical parameters |
| 0.4～0.8 |
| Air pressure |
Mpa |
| The amount of air pressure flow |
m³/min |
1.5～2.0 |
| Grit sizes |
# |
≥46 |
| Roller size |
mm |
φ500×370 |
| Roller speed |
r/min |
10 |
| Treating capacity per time |
kg |
10～20 |
| The number of spray guns |
Pieces |
adjustable |
| Size |
mm |
900×760×2060 |
| | | | |
2.Features:
1. The machine is convenient to load and unload, easy to operate and labor-saving.
2. The equipment is good at the mass production of small parts like zipper heads or screws.
3. The amount of sand-blasting is large, speed high, and impact strong.
4. Advanced foreign technologies is used in making the automatic pressure constant sand-blasting valve to make the pressure of the pressure tank constant, and to improve the quality of Workpieces with low compressed air consumption.
5. It is suitable to the blasting process of hard parts.
6. The size of the roller and the number of spray guns is adjustable to meet the requirement of customers. |
